Other languages  English - Español     

/// Sometimes I install a bike rack or a tow truck in my car. What about Digi4Park?

13 Mar / 2014
Author: admin Tags: There is no tags Comments: 0

Bookmark and Share

Normally when a towbar is fitted , it rarely affects the system parking sensors if the sensors are mounted factory because the vehicle manufacturer has taken into account the distance and angle detection sensors and the position of thereof and two size , but this is not always so.

Digi4Park® is a universal sensor kit, so we should be prepared to provide a solution for any environment or situation or most that we can present. Them, as we do not know the size of the tow or the point to be placed in the rear center sensors , WE HAVE A SYSTEM DESIGNED TO RIDE THAT CAN TOW PROBLEM.

This first thing to do is place the tow. If central rear sensors detect it, you can easily disable the central sensors from parking button Digi4Park® (check your manual where it tells you ). Also if the rear center sensors are turned off, the LED on the button will be informed of the parking situation.

If instead you just want to ride a truck or bike rack, you need to do is disable all rear sensors, since otherwise the system will inform you that there is a permanent obstacle (check your owner’s manual, informing you of this). Also if all rear sensors are turned off, the LED on the button will be informed of the parking situation.

Posted in: 1. Comercial and operative questions for end user




/// There are no comments yet, but you can be the first

Comments are closed.


Copyright 2017 digi4park - Design by digi4park