Digi4Park® LED Display
If the car doesn’t support Visual Parking information in the Screens, it is possible to order led display for FRONT or REAR. Digi4Park® unit control is able to control up to 2 displays simultaneously (one for the front part and one for the rear) and the user can configure the display to reverse the image and place it on the back of the roof.
In case of any sensor will be broken, it is possible to order single alone sensors as spare parts. Each sensor has a little wire that ends in IP64 connector in order to be connected to the Sensors Wire and making easy the replacement. Each sensor kit comes with spare 2 brackets and rubers.
Digi4Park® Sensors Wire
If the Sensors Wire is broken, it is also available as spare part the wiring for connecting the sensors in the bumpers. Remember that this wire is the SAME for FRONT & REAR areas of the car. This wires ends in a IP65 waterproof connection that must be connected to the EXTENSION WIRE.
Digi4Park® Extension W.
As well as we supply Sensors Wire, it is also available the wire that interconnect the Sensors Wire to the Digi4Park® Unit Control . Remember that this wire is the SAME for REAR & FRONT Areas of the car. This wire ends by one side in IP65 watherproof connection and in the other side in 6pin Microfit MOLEX Connection to the ECU.
Digi4Park® DRILL TOOL
Whether you want to install the Digi4Park® Parking sensors on the outside of the bumper in order to get a look & feel completely integrated, it is really important to make the holes with the best precision and best finish, without damage in the bumper paint. Digi4Park® offers to you the D4PTL14M that includes a Professional Drill tool Made in IRON.
The Digi4Park® SWITCH BUTTON is used for manually activation and deactivation of the Parking function under 15 km/h. Also it is used to inform by the LED if the system is working, errors or and to configure advance functions of Digi4Park®. Is is included in STANDARD & PLUS Kits.
Digi4Park® Standar ECU
You can also gets the STANDAR Digi4Park Unit Control, by example if you have and Extended kit and you want to build one Standart kit, or to substitute your Unit Control if it suffered any damage.
Digi4Park® Plus ECU
You can also gets the PLUS Digi4Park Unit Control, by example if you have and Extended kit and you want to build one Plus kit, or to substitute your Unit Control if it suffered any damage.
Digi4Park® Power Wire
The Universal Digi4Park® Power Wire is the universal standar for all intallations & included from factory in STANDAR & PLUS kits. Group in one connector Analog and CAN BUS inputs and outputs and also the Speaker connections.
It will be something extrange to change an speaker, but it you need to replace one of your Digi4Park® Diaphragm speakers we can supply to you. Remember that we use 8 Oh and 0.5 W and you can use either the front or rear speaker